Zte MF60 User Manual page 28

Select Settings > Firewall > Mac/IP/Port Filtering, the Mac/IP/Port Filtering is shown in the following
figure:
If you select Enable, the filter settings will appear:
Default Policy: Set how to handle the packet if none of the rules matches.
•
• MAC address: Set the MAC address that will be filtered.
• Dest. IP Address: Set the destination IP address that will be filtered.
Source IP Address: Set the source IP address that will be filtered.
•
• Protocol: Set which protocol will be used for filtering.
Dest. Port Range: Set the destination port numbers that will be filtered
•
• Source Port Range: Set the source port numbers that will be filtered.
Action: Set how to handle the packet if it matches with the rule.
•
28 Confidential and Proprietary Information of ZTE CORPORATION
ZTE MF60 User Manual