Table of Contents
Advertisement
1 2
|
P a g e
Upon initial power-up of your zBoost®, the base unit light indicator should be solid green. This
signifies a normal condition at power up.
zBoost® Base Unit Light Indicators
Solid GREEN
Slowly Alternating
RED and GREEN
Fast Flashing RED
Solid RED
Fast Alternating
RED and GREEN
Followed by no light
ZBOOST® YX520 (INTERNATIONAL) USER GUIDE
Troubleshooting Your zBoost® System
Normal condition at power up
Base Unit is operating at reduced performance and
coverage due to improper setup. Increase distance
between Signal Aerial and base unit to achieve
maximum performance and coverage. If condition
persists after relocating Signal Aerial and/or Base
Unit, contact Wi-Ex Customer Support for
additional information on setup.
Indicates Insufficient distance between the Signal
Aerial and the Base Unit. The Base Unit is
operating at significantly reduced coverage.
Increase distance between Signal Aerial and the
Base Unit to achieve maximum performance and
coverage. Remove power for 10 seconds and
reconnect power after relocating the aerial. If
condition persists after relocating Signal Aerial or
Base Unit, contact Wi-Ex Customer Support for
additional information on setup.
System is receiving signals from either the mobile
phone or the cell tower, which are too strong for
proper operation. This may be due to improper
setup or operation. The Base Unit is disabled.
Remove power for 10 seconds and reconnect
power to reset system. If the condition persists,
contact Wi-Ex Customer Support for additional
information on setup.
Base Unit is disabled. Call Wi-Ex Customer Support.
Advertisement
Table of Contents
