Setting Up The Monitor; Attaching The Monitor - Dell P2714H User Manual

Setting Up the Monitor

Attaching the Monitor

NOTE: The stand is detached when the monitor is shipped from the
factory.
NOTE: This is applicable for a monitor with a stand. When any other
stand is bought, please refer to the respective stand setup guide for
the set up instructions.
To attach the monitor stand:
1. Remove the cover and place the monitor on it.
2. Fit the two tabs on the upper part of the stand to the groove on the
back of the monitor.
3. Press the stand till it snaps into place.
Setting Up the Monitor 25
