Troubleshooting; Self-Test - Dell P2714H User Manual

Troubleshooting

WARNING: Before you begin any of the procedures in this section,
follow the Safety Instruction

Self-Test

Your monitor provides a self-test feature that allows you to check
whether your monitor is functioning properly. If your monitor and
computer are properly connected but the monitor screen remains dark,
run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure
proper Self-Test operation, remove Digital (white connector), the
Analog (blue connector) and DP (black connector) cables from the
back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black
background) if the monitor cannot sense a video signal and is working
correctly. While in self-test mode, the power LED remains white. Also,
depending upon the selected input, one of the dialogs shown below
will continuously scroll through the screen.
Dell P2714H
?
The dispaly will go into Power Save Mode in 5 minutes
Dell P2714H
?
The dispaly will go into Power Save Mode in 5 minutes
50 Troubleshooting

No DisplayPort Cable
No DVI D Cable