Dell P2714H User Manual page 45

When the monitor enters the Power Save mode, the following message
appears:
Dell P2714H
Entering Power Save Mode.
Activate the computer and wake up the monitor to gain access to the
Using the On-Screen Display (OSD) Menu.
If you press any button other than the power button, the following
messages will appear depending on the selected input:
Dell P2714H
There is no signal coming from your computer. Press any key on the
keyboard or move the mouse to wake it up.
If there is no display, press the monitor button now to select the correct input
source on the On-Screen-Display menu.
If VGA, DVI or DisplayPort cable is not connected, a floating dialog box as
shown below appears. The monitor will enter Power Save Mode after 5
minutes if left at this state.
Dell P2714H
No VGA Cable
?
The dispaly will go into Power Save Mode in 5 minutes
Operating the Monitor 45
