Osd Warning Messages - Dell E2414H User Manual

LCD
Helps reduce minor cases of image retention.
Conditioning Depending on the degree of image retention, the
program may take some time to run. You can enable
this feature by selecting "Enable".
Reset Other Select this option to restore default other settings,
Settings such as DDC/CI.
Factory Reset all OSD settings to the factory preset values.
Reset
Personalize User can select from "Preset Modes", "Brightness/
Contrast", "Auto Adjust", "Input Source", "Aspect Ratio" and
set as shortcut key.
Reset Allows you to restore shortcut key to the default setting.
Personalization
36 Operating the Monitor


OSD Warning Messages

When the monitor does not support a particular resolution mode you will
see the following message:
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See Monitor Specifications
and Vertical frequency ranges addressable by this monitor. Recommended
mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled.
When monitor enters Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
for the Horizontal
OSD
Operating the Monitor 37
