Attaching The Cable Cover; Removing The Stand; Wall Mounting (Optional) - Dell E2414H User Manual

Attaching the Cable Cover

Removing the Stand

NOTE: To prevent scratches on the LCD screen while removing the
stand, ensure that the monitor is placed on a clean surface.
NOTE: This is applicable for a monitor with a stand. When any other
stand is bought, please refer to the respective stand setup guide for
set up instructions.
To remove the stand:
1. Pleace the monitor on a flat surface.
2. Press and hold the Stand release button.
3. Lift the stand up and away from the monitor.
20 Setting Up the Monitor


Wall Mounting (Optional)

(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible base
mounting kit.
1. Place the monitor panel on a soft cloth or cushion on stable, flat table.
2. Remove the stand.
3. Use a screwdriver to remove the four screws securing the plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the LCD.
5. Mount the LCD on the wall by following the instructions that came with
the wall mounting kit.
NOTE: For use only with UL Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 3.0 kg.
Setting Up the Monitor 21
