Electrical Specifications; Physical Characteristics; Environmental Characteristics; Power Management Modes - Dell E2414H User Manual

Electrical Specifications

Video input signals Analog RGB, 0.7 Volts +/-5%, positive polarity at
75 ohm input impedance
Digital DVI-D TMDS, 600mV for each
differential line, positive polarity at 50 ohm input
impedance
Synchronization input Separate horizontal and vertical
signals synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage/ 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.5 A (Max.)
frequency/current
Inrush current 120 V:30 A (Max.)
240 V:60 A (Max.)

Physical Characteristics

Connector type
Signal cable type
Dimensions (with stand)
Height
Width
Depth
Dimensions (without stand)
Height
Width
Depth
Stand dimensions
Height
Width
Depth
Weight
Weight with packaging
Weight with stand assembly and
cables
12 About Your Monitor

15-pin D-subminiature, blue connec­
tor; DVI-D, white connector
Digital: Detachable, DVI-D (E2414H
only), Solid pins.
Analog: Detachable, D-Sub, 15 pins.
418.3 mm (16.47 inches)
570.0 mm (22.44 inches)
164.2 mm (6.46 inches)
337.5 mm (13.29 inches)
570.0 mm (22.44 inches)
46.5 mm (1.83 inches)
318.7 mm (12.55 inches)
180.6 mm (7.11 inches)
164.2 mm (6.46 inches)
5.87 kg (12.94 lb)
4.48 kg (9.88 lb)
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
Weight of stand assembly

Environmental Characteristics

Temperature
Operating 0 °C to 40 °C
Storage: -20 °C to 60°C (-4 °F to 140 °F)
Non-operating
Shipping: -20 °C to 60°C (-4 °F to 140 °F)
Humidity
Operating 10% to 80% (non-condensing)
Storage: 5% to 90% (non-condensing)
Non-operating
Shipping: 5% to 90% (non-condensing)
Altitude
Operating 5,000 m (16,400 ft) max
Non-operating 12,191 m (40,000 ft) max
238.85 BTU/hour (maximum)
Thermal dissipation
102.36 BTU/hour (typical)

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed
in your PC, the monitor can automatically reduce its power consumption
when not in use. This is referred to as Power Save Mode. If the computer
detects input from keyboard, mouse, or other input devices, the monitor
automatically resumes functioning. The following table shows the power
consumption and signaling of this automatic power saving feature:
VESA Modes Horizontal Vertical
Sync Sync
Normal Active Active
operation
Active-off Inactive Inactive Blanked Glowing
mode
Switch off - -
The OSD will only function in the normal operation mode. When any button
3.00 kg (6.75 lb)
1.03 kg (2.27 lb)
Video Power Power Consump­
Indicator tion
Active White 20 W (typical)/30 W
(maximum)
Less than 0.5 W
White
- Off Less than 0.5 W
About Your Monitor 13
