Attaching The Cable Cover; Removing The Monitor Stand - Dell UltraSharp U2515HX User Manual

Attaching the Cable Cover

NOTE: The cable cover is detached when the monitor is shipped from the
factory.
1. Fit the two tabs on the bottom part of the cable cover to the groove on the back
of the monitor.
2. Press the cable cover till it snaps into place.

Removing the Monitor Stand

NOTE: To prevent scratches on the LCD screen while removing the stand,
ensure that the monitor is placed on a soft, clean surface.
NOTE: This is applicable for a monitor with a stand. When any other stand
is bought, please refer to the respective stand setup guide for the setup
instructions.
To remove the stand:
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand release button.
3. Lift the stand up and away from the monitor
2
1
2
3
Setting Up the Monitor
31
|