Heat Sink And Processor; Removing The Heat Sink And Processor - Dell OptiPlex 390 Owner's Manual

Heat Sink And Processor

Removing the Heat Sink and Processor

1. Follow the procedures in
cover .
2. Remove the
front bezel .
3. Remove the
drive cage .
4. Remove the
5. Disconnect the heat-sink assembly cable from the system board.
6. Release the Input/Output Board or the FlyWire cable from the routing
channel on the heat sink.
7. Loosen the captive screws in the order of 1,2,3 and 4.
Before Working Inside Your Computer .
10
27