Dell OptiPlex 390 Owner's Manual page 61

Security
CPU XD Support
OROM Keyboard
Access
Admin Setup Lockout Allows you to enable or disable the option to enter Setup when
Performance
Multi Core Support
Intel SpeedStep
C States Control
Hyper-Thread
Control
Power Management
AC Recovery
• On-Silent — Enabled by default if chassis intrusion is
detected.
Allows you to enable or disable the Execute Disable mode of the
processor. This option is enabled by default.
This option determines whether users are able to enter Option
ROM Configuration screens via hotkeys during boot.
Specifically, these settings are capable of preventing access to
Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension
(CTRL+P/F12)
• Enable — User may enter OROM configuration screens via
the hotkey.
• One-Time Enable — User may enter OROM configuration
screens via the hotkeys on next boot only. After next boot,
the setting will revert to disabled.
• Disable — User may not enter OROM configuration screens
via the hotkey.
This option is set to Enable by default.
an Administrative password is set. This option is not set by
default.
This field specifies whether the process will have one or all
cores enabled. This option is enabled by default.
Allows you to enable or disable the Intel SpeedStep mode of the
processor. This option is disabled by default.
Allows you to enable or disable additional processor sleep
states. This option is disabled by default.
Allows you to enable or disable the Hyper-Threading
Technology. This option is enabled by default.
Determines how the system responds when AC power is re-
applied after a power loss. You can set the AC Recovery to:
61