Transporting/Storage - Honda F501 Owner's Manual

8. TRANSPORTING/STORAGE
m
When transporting the tiller, turn the fuel valve OFF and keep
the tiller level to prevent fuel spillage. Fuel vapor or spilled fuel may ignite.
Before storing the unit for an extended period;
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel . . .
a. With the fuel valve turned OFF, remove and empty the sediment cup.
b. Turn the fuel valve ON and drain the gasoline in the fuel tank into a
suitable container.
c. Replace the sediment cup and tighten securely.
d. Drain the carburetor by removing the drain screw.
Drain the gasoline into a suitable container. Replace the drain screw.
DRAIN SCREW
SEDIMENT CUP
m
Gasoline is flammable and explosive under certain conditions.
Do not smoke or allow flames sparks near the equipment while draining
fuel.
3. Pull the starter cord until resistance is felt. Continue pulling until the
notch on the starter pulley aligns with the hole on the recoil starter (see
illustration below). At this point, the intake and exhaust valves are clos-
ed, and this will help to protect the engine from internal corrosion.
Align the notch on the starter pulley
with the hole at the top of recoil starter.
4. Change engine oil. (If anticipated storage will exceed 1 year.)
5. Cover tiller and place it in a dry, dust-free, secure area, out of the reach
of children.
NOTE: Solid plastic covers are not recommended, because they will trap
moisture around the tiller, promoting rust and corrosion.
27