Safety Precautions - TDK VCS-04 User Manual

Safety Precautions

Safety Statement
The following general safety precautions must be observed during installation, operation,
maintenance, and service to the product. Failing to follow these precautions or warnings
listed in this manual may result in physical injury. TDK RF Solutions assumes no liability
for the user's failure to follow these precautions.
Shock Hazard
To minimize shock hazard, the VCS-04 Video Camera System must be connected to an
electrical ground. The SI-300CC is equipped with a three-conductor AC power cable. The VC-
04 is available with either a DC power supply or an AC power supply with a three-conductor
AC power cable. The power cable(s) must be plugged into an approved three-contact
electrical outlet.
Do not attempt to open the product case while power is present.
Service Precautions
The VCS-04 contains no user serviceable parts. Do not install substitute parts or perform
unauthorized modification to this product. Contact a TDK RF Solutions Sales and Support
Office for service and repair requirements.
To minimize the risk of injury, do not attempt to service, repair, modify, or adjust this
product.
Safety Messages
Warning messages such as the example below may appear in this document. To avoid
personal injury and/or damage to the product, warning instructions must be followed.
WARNING:
No user serviceable parts inside. Contact a TDK RF Solutions Sales and
Support Office for service.
TDK RF Solutions Video Camera System User Manual ii