Camera Control Module Operation - TDK VCS-04 User Manual

CONFIG:
EXIT:

Camera Control Module Operation

Enter the Camera Control Module page by pressing the appropriate F-key from the Module
page. There are two different camera pages available depending on the configuration of the
SI-300. Once a camera page is displayed, the joysticks can be used for the PAN, TILT, ZOOM
and FOCUS functions.
This page only displays the name of the camera and the channel number it is on.
VC-04 PAGE
This page gives the user the ability to turn the Auto Focus on and off and to save and recall
camera positions.
The following is a description of the different functions present on this page:
Auto Focus ON/OFF:
Set:
Recall:
CONFIGURATION PAGE
Enter the VC-04 camera configuration page by first going to the options page and pressing
the "F3" key to go to the SI-300CC configuration page. The user can scroll through each
channel using the "F1"(NEXT CHANNEL) key. Once the proper camera is highlighted the
"F2"(CONFIG) key can be pressed to enter the VC-04 camera configuration page.
This page gives the user the ability to set and display the identification tag and adjust the
iris
TDK RF Solutions
Video Camera System User Manual
(F2) Configure: Pressing this key allows the user to enter the
configuration for the module that is currently highlighted.
Not every module has a configuration screen.
(F4) Exit: This key takes the user back to the Main Menu
(F1) Auto Focus ON or OFF. This key can be toggled to send a
command to the camera to turn the auto focus on or off.
(F3) Set memory position. When a number is entered in the
Position field, pressing this key will save the current zoom,
focus, pan and tilt positions.
(F4) Recall memory position. When a number is entered in
the Position field, pressing this key will recall the
corresponding saved memory positions for that number.
Toggle auto focus on or off
Toggle zoon on or off
Set memory position
Recall a saved memory
position
14