VC-04 Rear Panel
The following graphic displays port locations on the VC-04's rear panel.
V1 Power Input Attach AC power cable here.
V2 Manual Power Switch Turns VC-04 power on and off.
V3 Ports TX (transmit) and RX (receive), video, and audio ports to connect to the SI-300CC.
V4 Potentiometer Control Adjusts microphone gain (for audio option).
V5 Pan/Tilt Connection Cable 9-Pin D-SUB connector used to connect the VC-04 to the optional
Pan/Tilt unit.
TDK RF Solutions
Video Camera System User Manual
V1
V2
V3
V4
V5
V6
VC-04 Rear Panel Layout
6