Power Sources; Ac Adapter Specifications; Inserting Batteries - TDK Sound Cube User Manual

High-fidelity stereo boombox
Hide thumbs Also See for Sound Cube:
Table of Contents

Advertisement

AC CONNECTION
Insert the small end of the AC adapter into the jack on
the rear of the unit. Insert the other end (with the 2
blades) into a conveniently located AC outlet having
120V AC, 60Hz.

AC ADAPTER SPECIFICATIONS:

DC 18V Z
NOTES:
To disconnect the AC adapter, remove it from the
DC IN jack on the side of the unit as well as from
the AC outlet.
Use the enclosed AC adapter for this product only.

INSERTING BATTERIES

To use this unit with battery power,
remove the Battery Compartment cover
on the bottom of the unit by removing the
two screws with a flathead screwdriver,
and then lifting the cover off. Insert twelve
(12) "D" cell batteries (not included),
observing the battery polarity indicated
inside the compartment. Replace the
Battery Compartment cover and screws.
NOTE: The AC adapter must be
disconnected from the jack on the rear of
the unit in order for the unit to operate on
battery power. We recommend Alkaline or
rechargeable types for maximum cycle
time and ecological efficiency.
Follow these precautions when using batteries in this device:
1.
Caution – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
2.
Use only the size and type of batteries specified.
3.
Be sure to follow the correct polarity when installing the batteries as indicated in the Battery
Compartment. A reversed battery may cause damage to the device.
4.
Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old
batteries with fresh ones.
5.
If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
6.
Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery
manufacturer's directions.)
7.
Remove batteries promptly if consumed.
8.
Clean the battery contacts and also those of the device prior to battery installation.

POWER SOURCES

BATTERY PRECAUTIONS
6
+
+
+
+
+
+
+
+
+
+
Tomada de CA
Plugue do adaptador C
Para o plugue de entrada CC
+
+

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sound cube tp6701blk

Table of Contents