TDK Sound Cube User Manual page 17

USING THE INSTRUMENT FUNCTION
1
SOURCE EQ
Turn this unit on by rotating the
Volume/Power control until a click is
heard and the Power indicator lights to
turn the unit on.
3
1
SOURCE EQ
1 2
Select a source to play along with
(USB, AUX1 or AUX2) by pressing the
Source button/indicator 1; the Source
menu will appear in the display. Select
USB, AUX1 or AUX2 using the Select
control 2, and then press the OK
button 3 to confirm.
NOTE:
Refer to the owner's manual of the instrument for detailed connection instructions.
OPERATION (CONTINUED)
3
O ®p n
3 4 5
2
CONTINUED ON THE NEXT PAGE
2
Insert one end of an instrument cable
into the OUTPUT jack on your
instrument and the other end into the
INST (Instrument) jack on the rear of
this unit.
4
AUX1
SOURCE
Press the Source button/indicator 1;
the Source menu will appear in the
display. Select MIX INST using the
Select control 2, and then press the
OK button 3 to confirm to select
Instrument; the MIX menu will appear in
the display.
16
50%
INST
1
3
EQ O ®p n
2