Table of Contents
Advertisement
No Sound – General
• Volume is set to minimum; raise volume.
• Power is not on; turn power on.
• Correct function button/indicator was not pressed; press the correct function
button/indicator.
FM, no sound
• FM was not selected. Press the Source button to bring up the Source Menu.
Then select FM using the Select control and the OK button to confirm.
Radio, poor sound
• Station is not tuned properly; retune station.
• FM Antenna is not adjusted properly (see page 8).
iPod, no sound
• iPod is not plugged into the USB jack; plug in securely.
• USB was not selected. Press the Source button to bring up the Source Menu.
Then select USB using the Select control and the OK button to confirm.
iPod, poor sound
• Close other applications on the iPod/iPhone or restart the iPod/iPhone.
• Consider using the headphone audio out for music playback.
The following screen appears:
• There is no USB device connected; connect to the USB jack.
• If USB device is connected, keep Sound Cube powered on,
remove the USB plug from the Sound Cube and then
reconnect.
• The file is corrupted, or not in a format this unit will play.
• The connected USB device is not supported by the product.
• The device can still be used for playback by connecting the
headphone output to the AUX by 1/8" stereo cable.
TROUBLESHOOTING GUIDE
18
No device
connected
Neeve.mp3
Can't read
this file
Device not
supported
Hide quick links:
Advertisement
Table of Contents
