Step 2 : PREPARE ELECTRICAL WIRING
CAUTION
For personal safety, remove house fuse or open circuit breaker before installation.
Do not use an extension cord or adapter plug with this appliance.
Electrical and grounding connections must comply with the national electrical code/provincial and
municipal code and/or other local codes.
Step 3 : PREPARE DISHWASHER FOR INSTALLATION
Step 4 : INSTALL THE DISHWASHER IN CUPBOARD
CAUTION
If the height of cupboard is below 850mm,
you should remove the top table by
unscrewing the 2 screws. (Two of front
and two of rear)