HP 650 Maintenance And Service Manual page 77

c. Hard drive (see
d. Top cover (see
e. System board (see
Remove the the processor:
1. Turn the system board upside down, with the front toward you.
2. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2), until you hear a click.
3. Remove the processor (3).
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
68 Chapter 4 Removal and replacement procedures
Hard drive on page
Top cover on page
System board on page
The gold triangle (4) on the processor must be aligned with the triangle icon embossed
46)
50)
63)