Processor - HP 650 Maintenance And Service Manual

Reverse this procedure to install the fan/heat sink assembly.

Processor

Description
Intel Core i5-3210M 2.50-GHz processor (3.0-MB L3 cache, 35 W)
Intel Core i3-3110M 2.30-GHz processor (3.0-MB L3 cache, 35 W)
Intel Core i3-2370M 2.40-GHz processor (3.0-MB L3 cache, 35 W)
Intel Core i3-2350M 2.20-GHz processor (3.0-MB L3 cache, 35 W)
Intel Core i3-2308M 2.10-GHz processor (3.0-MB L3 cache, 35 W)
Intel Pentium B970 TJ85 2.30-GHz processor (2.0-MB L3 cache, dual core, 35 W)
Intel Pentium B960 TJ85 2.20-GHz processor (2.0-MB L3 cache, dual core, 35 W)
Intel Celeron DC B820 1.70-GHz processor (2.0-MB L3 cache, dual core, 35 W)
Intel Celeron DC B815 1.60-GHz processor (2.0-MB L3 cache, dual core, 35 W)
Intel Celeron DC B730 1.80-GHz processor (2.0-MB L3 cache, dual core, 35 W)
Before removing the processor, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Memory module/wireless module compartment cover (see
b. Keyboard (see
Battery on page 36), and then remove the following components:
Keyboard on page 40)
Spare part number
680645-001
682417-001
677152-001
653340-001
693542-001
676785-001
664662-001
690537-001
677153-001
690536-001
Memory module on page
Component replacement procedures
37)
67