Spark Arrester Service (Optional Equipment) - Honda Harmony II HRR216PDA Owner's Manual

SPARK ARRESTER SERVICE (optional equipment)

Your lawn mower engine is not factory-equipped with a spark
arrester. In some areas, it is illegal to operate an engine without a
spark arrester. Check local laws and regulations. An optional
USDA approved spark arrester is available from an authorized
Honda servicing dealer. See page 50 for part numbers
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
1. Allow the engine to cool, then remove the bolts from the muffler
shield. Remove the muffler shield.
2. Remove the two set screws and remove the spark arrester.
3. Check for carbon deposits on the spark arrester and the exhaust
port. Brush carbon deposits away with a wire brush. Be careful to
avoid damaging the spark arrester screen.
4. Installation is the reverse of removal. Tighten all hardware securely.
SET
SCREW (2)
BOLT (3)
MUFFLER
SHIELD
ADDITIONAL INFORMATION
SPARK ARRESTER
MUFFLER
61