Picture Screen Adjustment - Christie 38-VIV205-01 User Manual

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen adjustment function, which enables you to display the desirable image size.
1 Press MENU button and ON-SCREEN MENU will appear. Press
the POINT LEFT/RIGHT button(s) to move the red frame pointer
to SCREEN Menu icon.
2 Press the POINT DOWN button and move the red frame pointer
to the function that you want to select and then press SELECT
button.
Normal
Provides image to fit screen size.
True
Provides image in its original size. When original image size is larger
than screen size (1024 x 768), this projector enters "Digital zoom +"
mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected, ON-SCREEN MENU disappears
and the message "D. Zoom +" is displayed. Press SELECT button to
expand image size. And press the POINT UP/DOWN/LEFT/RIGHT
button(s) to pan the image. The panning function can work only when
the image is larger than the screen size.
A projected image can be also expanded by pressing D.ZOOM
button on Remote Control Unit.
Digital Zoom –
When Digital zoom – is selected, ON-SCREEN MENU disappears
and the message "D. Zoom –" is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM
button on Remote Control Unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
/ , SELECT, POINT and AUTO PC ADJ. buttons.
COMPUTER INPUT
SCREEN MENU
Move the red frame to the function and
press SELECT button.
NOTE
True and Digital zoom +/– can not be operated
when "RGB", "1035i (HDTV)" or "1080i (HDTV)" is
selected on PC SYSTEM Menu (P23).
Wide can not be selected when "720p (HDTV)",
"1035i (HDTV)" or "1080i (HDTV)" is selected on
PC SYSTEM Menu (P23).
This projector can not display any resolution higher
than 1280 X 1024. If your computer's screen
resolution is higher than 1280 X 1024, reset
resolution to lower before connecting projector.
Image data in other than XGA (1024 x 768) is
modified to fit screen size in initial mode.
Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.
SCREEN Menu icon
29