Edimax EW-7722UnD User Manual page 29

wireless device you wish to connect. When you‟re adding a profile
from an existing access point or wireless device, authentication type
will be selected automatically, and please do not change it.
If you select „LEAP‟, you‟ll be prompted to input LEAD specific
settings:
Please input LEAP identity, password, domain name, and select
encryption type. You can check „Show Password‟ box so the
password you inputted will be displayed as you type, but not replace
by asterisk.
Select the encryption type of the wireless access point or wireless
device you wish to connect. When you‟re adding a profile from an
Encryption
existing access point or wireless device, the encryption type will be
selected automatically, and please do not modify it.
WPA Input WPA preshared key here. If encryption is not enabled, or you
select „WEP‟ as encryption type, this field will be disabled and
Preshared
Key grayed out.
You can select key type (Hexadecimal or ASCII) and input WEP key
here. If encryption is not enabled, or you select „WPA‟ as encryption
type, this field will be disabled and grayed out. You can set up to 4
WEP keys here.
There are two types of WEP key: Hexadecimal and ASCII. For
WEP Key Hexadecimal key, you can input number 0-9 and alphabet a-f; for
example, „001122aabbcc‟; For ASCII key, you can input number 0-9
and alphabet a-z; for example, mywepkey12345.
The length of WEP key depends on the type of WEP key you
selected. You can input 10 or 26 hexadecimal characters and 5 or 13
ASCII characters as WEP key.
Show Check this box and all passphrases or security keys you inputted will
Password be displayed as you type, but not replace your input with asterisk.
Use 802.1x If the access point you wish to connect requires 802.1x
26