Table of Contents
Advertisement
How to Operate
Control Dial
The Control Dial is a multi-functional device located behind the LED Indicator on the right side of
the front bezel. It has three movements-rotate upward, rotate downward and press inward as a
button.
1. Power On/Off
Press the Control Dial to power the unit on from the off stage (the display is off). To turn the
power off, press the Control Dial and hold for at least 1 second until the display turns off.
2. OSD Control
While the monitor is on (image on the screen), pressing on the Control Dial activates the
OSD. While the OSD menu is active, use the three way movements of the Control Dial to
adjust the monitor.
Rotate Downward:
Rotate Upward:
Button Press:
3. Change of Brightness Setting
If you rotate the Control Dial without first having clicked to enter the OSD, then it will change
the brightness setting. It will do so in a quick way by adjusting with larger steps in the bright
area and gradually lower values towards the dark area. This is to facility quick change of
brightness when you have the "Dimming option" installed.
LED Indicator
This LED indicator turns green when the power is switched ON and the power cord is properly
attached. It turns amber when the monitor goes into a power saving mode (Active Off). On some
models it will be switched off entirely after 10 minutes to avoid that the lamp will distract your
vision.
20
Move Up/Right, Increase, Larger, More
Move Down/Left, Decrease, Smaller, Less
Execute, Do, Save
Hide quick links:
Advertisement
Table of Contents
