Table of Contents
Advertisement
Quick Links
Display User's Manual
Display User's Manual
24-inch (61.1cm) Color LCD Display
Conformity according to the Council Directive 93/42/EEC concerning Medical
Devices.
Use this product after carefully reading this Manual and understanding the
contents.
Store this manual with care, as close as possible, so that you can read
whenever necessary.
ML 2 4 0 D
MedicLine
ML240D & ML420D
www.olorin.com
C onte nts
1. Safety Precautions
2. Equipment Symbols
3. Cleaning Instructions
Advertisement
Table of Contents
Related Manuals for Olorin MedicLine ML240D
Summary of Contents for Olorin MedicLine ML240D
- Page 1 Store this manual with care, as close as possible, so that you can read whenever necessary. you for purchasing our color LCD C onte nts 1. Safety Precautions www.olorin.com 2. Equipment Symbols efully read this User's Manual and use 3. Cleaning Instructions...
-
Page 3: Table Of Contents
Contents 1. Preface 2. Product features 3. Intended use of this product 4. Intended markets 5. Safety Precautions 6. Regulatory Tests and Certifications 7. FCC Information 8. Warranty and Limitation of Liability 9. Product identification 10. Cleaning of the Product 11. -
Page 4: Preface
Warning Keep this Users Manual in an easy accessible and safe place for future reading of it. If you lose your copy, you may request a new one by contacting us at our internet home page www.olorin. com. Olorin reserves the right to change the specifications of this product without any notice. Such changes could cause the operation of the product to be slightly different from the descriptions in this copy of the Users Manual. -
Page 5: Product Features
VESA standard display mode. The IPS panel emits beautiful, crystal clear images with high brightness and contrast ratio. ML240D and ML420D, both have wide viewing angles, 178 degrees in both horizontal and vertical directions (CR>=10). The monitor has Olorin’s automatic brightness stabilizing circuit that restrains deteriorations and brightness drifts when power is turned on. -
Page 6: Intended Use Of This Product
Intended Markets Olorin products are developed primarily for sales and installation in countries within Europe and North America. The products comply with all regulations and directives issued by the European Union and by authorities in the United States. -
Page 7: Safety Precautions
Safety Precautions It is important that you read through the following notes of Safety Precautions to avoid any damage to the Product, yourself or other property. Following these precautions will also ensure that you get the best use of the Product. DO NOT OPEN THE PRODUCT. - Page 8 Safety Precautions Do not use the unit turned over on its back, put on its side, or upside down. These positions may cause the heat that the unit generates to accumulate inside the unit. Such overheating can cause damage to the Warning product and eventually start a fire.
- Page 9 Safety Precautions Maintenance Do not remove the plastic cabinet. There are high voltage parts inside that may lead to electric shock. Ask a re-seller for adjustment and inspection. Warning Do not remodel or repair. It may lead to fire, electric shock, or injuries. Warning Clean the dust inside the display once a year.
-
Page 10: Regulatory Tests And Certifications
Approvals are listed by each Regulatory Agency under the name of the manufacturer and model number as specified on the Product Identification Label. Copies of such approvals can be requested by contacting Olorin AB via www.olorin.com. -
Page 11: Fcc Information
Test of medical power adapter The power supply is Class I. Protective earthed parts are only located inside the power supply enclosure and therefore are not accessible. The accessible parts of the enclosure and output are DOUBLE INSULATED from all mains voltage electrical parts. Ground continuality test is not relevant. -
Page 12: Warranty And Limitation Of Liability
For details of the warranty please see the separate warranty document included with this product. Limitation of Liability Olorin AB, including any of its affiliates, manufacturing partners and sales agents, is not liable for any claim for damages including, but not limited to, loss of business profits, disruption of business, change or loss of saved data, when damage is arising from •... -
Page 13: Cleaning Of The Product
Cleaning of the Product Be careful when cleaning the plastic housing of the panel so that no liquid or other objects will drip down into the product through the ventilation holes. This could cause electric shock and damage the product. Caution Normal dust and lint particles can be easily wiped off with a soft cloth tissue. -
Page 14: Getting Started
Getting started Before operating this monitor, please make sure that all items listed below are present in your delivery. Standard Items • The LCD monitor panel • User’s manual • Warranty booklet • AC/DC adapter (ML240D only) • AC Power cord •... -
Page 15: Mounting On A Wall Or Lcd Arm
Mounting on a wall or LCD arm Mounting The Monitor can be mounted onto the wall or stand. If you intend to mount the monitor on the wall, we strongly recommend that you use wall mount The Monitor has Video Electronics Standards Association (VESA) standard mounting holes kits with attached M4*10mm screws and can load more than monitor weight, that you ensure it tapped into the rear panel. -
Page 16: Connection Method
Connection Method No tools are required to connect the LCD monitor to your PC or other device. Simply follow the instructions outlined in the next few pages. Connectors for the signal cables and power are located on the back of the panel behind the cover lid. -
Page 17: Input Signals
Input signals Connections, 24” and 42” 1. DC power input connector This is connected to a DC power connector from the provided AC power adapter. N/OFF 2. CVBS Video input/output connector Composite signal input. The attached composite video connection cable is connected to this g “Power”... -
Page 18: How To Operate
Display User's Manual How to Operate ML 2 4 0 D 24-inch (61.1cm) Color LCD Display Touch key 1. Power ON/OFF Pressing “Power” key turns on the LCD display. Pressing “Power” key for more than three seconds turns the power off. Conformity according to the Council Directive 93/42/EEC concerning Medical Devices. -
Page 19: Osd Adjustment Functions
OSD Adjustment Functions PreVu™ On-Screen Display The LCD monitor features a PreVu™ On-Screen Display(OSD) menu with easily identifiable icons designed to make adjusting your monitor display settings a more user-friendly process. When highlighted, the icon illustrates the control function and a brief instruction to assist the user in identifying which control needs adjustment. - Page 20 Charts of OSD Adjustment Functions Main menu chart Exit Close the OSD screen, in sub menus Exit refers to moving up in the Menu tree structure. Input Source Settings Select source input for Main channel Source Enable Select which sources should be enabled and disabled. Image Settings Auto Setup *1 Automatic screen size/position/brightness/contrast adjustment.
- Page 21 Charts of OSD Adjustment Functions Main menu chart Video Setup *2 Main MADI mode De-interlace set to off Normal De-interlaced set to on Adaptive De-interlace set to auto check and adept to video source. Noise Reduction The media noise reduction block removes unwanted ringing and block noise from images with MPEG or JPEG compression and decompression.
- Page 22 Charts of OSD Adjustment Functions Main menu chart Color Mode Settings Color Temp. Cool Select a cold color temperature of about 9300K Neutral Select a neutral color temperature of about 6500K Warm Select a warm color temperature of about 5400K User In a separate sub-menu you can set individual values for Red, Green and Blue.
- Page 23 Charts of OSD Adjustment Functions Main menu chart PIP Display (PIP) Only available if the ”PIP mode” selected is PIP. PIP Size PIP Size Adjust the full size for Sub channel display PIP H-Size Adjust the H size for Sub channel display PIP V-Size Adjust the V size for Sub channel display PIP Position...
- Page 24 Charts of OSD Adjustment Functions Main menu chart OSD Misc. OSD Position OSD H.Position Adjust the Horizontal position for OSD OSD V.Position Adjust the Vertical position for OSD Language Select language for OSD. Returns to Main Menu and will from then on show the OSD in the selected language.
-
Page 25: Applicable Signal Timings
Applicable Signal Timings: ML240D The display may not work correctly with timings other than the ones listed below. ◎ : Recommended timing for PC ○ : Applied timing Resolution Frequency Input Signal Mode Name H (kHz) V (Hz) Analog Digital 31.47 59.54 ○... - Page 26 Applicable Signal Timings: ML420D The display may not work correctly with timings other than the ones listed below. Resolution Frequency Mode Name H (kHz) V (Hz) 31.47 37.86 85.08 31.47 70.07 31.86 85.08 31.47 50.02 31.47 59.93 37.86 72.81 VESA 37.5 43.27 85.01...
- Page 27 Applicable Video Signal Timings S-video Composite YPbPr RGBS HDMI NTSC NTSC 1080p VGA 60hz 1080p 1080i SVGA 60hz 1080i 720p XGA 60hz 720p NTSC SXGA 60hz NTSC NTSC...
-
Page 28: Specifications
Specifications ML240D Display Screen size, Format 24” (518x324 mm), 16:10 Brightness, candela/m2 400 cd/m2 Contrast 700:1 Resolution (Megapixel) 1920x1200 Response time 13 ms Viewing angles, H/V 178/178 Color depth 16,7M Panel type Backlight type CCFL Environmental Operating Storage Temperature, Celcius 10~40°C -20~60°C Humidity (non-condensation) -
Page 29: External Dimensions
Specifications ML240D International standards Medical certificates IEC60601-1, EN60601-1, EN60601-1-2, UL60601-1, CAN/CSA C22-2 No. 601-1 IT certificates UL/cUL, FCC-B, CE, WEEE, RoHS Warranty Replacement warranty Two (2) years Appearance Net. weight 11kg Measurements (WxHxD) 604x425x251 Product color White w/ gray front bezel Base unit Height adjustable Tilting and swivel... - Page 30 Specifications ML420D Display Screen size, Format 42” (930x523 mm), 16:9 Brightness, candela/m2 600 cd/m2 Contrast 3500:1 Resolution (Megapixel) 1920x1080 Response time Viewing angles, H/V 178/178 Color depth 16,9M Panel type Backlight type CCFT Environmental Operating Storage Temperature, Celcius +10 to 40 C -20 to 60 C Humidity (non-condensation) 30 to 75%...
- Page 31 Specifications ML420D International standards Medical certificates IEC60601-1, EN60601-1, EN60601-1-2, UL60601-1, CAN/CSA C22-2 No. 601-1 IT certificates UL/cUL, FCC-B, CE, WEEE, RoHS Warranty Replacement warranty Two (2) years Appearance Net. weight 30 kg Measurements (WxHxD) 1020x613x120 Product color Black Base unit Height adjustable Tilting and swivel Mounting...
-
Page 32: Special Considerations For Lcd Panels
Special Considerations for LCD Panels Manufacturing of LCD panels is very delicate with large panel elements being manufactured in one unit and then cut to smaller sizes to be used in different products. In addition a panel consists of several layers of components (back-light lamps, diffusers, electronics and color filters). There are different technologies used with each having its advantages and disadvantages resulting in end user products with different specifications even when taken from the same manufacturing batch. - Page 33 Special Considerations for LCD Panels Olorin products are warranted to follow this Cable length and input signal standard as a Class II product. When using long cables from the video source (PC, camera etc) to the monitor the signal Image sticking...
-
Page 34: Longer Life For Your Monitor
Longer life for your monitor The components that have biggest influence The higher the luminance is set on the on the useful life of the product are the monitor the greater is the wear of the backlight backlight lamps. These are made of CCFL lamps. -
Page 35: Troubleshooting
Troubleshooting Start your trouble shooting with the following actions Possible power problem • Make sure power is connected. If you switch the monitor off and then back on, the diode on the front should show green light. Some models have a main power switch next to the power inlet check that this is set to on. -
Page 36: Reference
Reference Barten curve Curve used to emphasize areas of a digital grayscale where the human eye have trouble discerning similar shades of gray, named after its creator Dr. Peter G.J. Barten. This unit conforms with DDC-2B and VESA * standards. The DDC function reads information stored in the monitor about its capabilities. -
Page 37: Contact Information
Contact Olorin AB Marios gata 11 SE 434 37 Kungsbacka Sweden Phone: +46 (0)300 566 780 Fax: +46 (0)300 566 789 E-mail: info@olorin.com www.olorin.com OLM0003EN_1206...
Need help?
Do you have a question about the MedicLine ML240D and is the answer not in the manual?
Questions and answers