Mounting On A Wall Or Lcd Arm - Olorin VistaLine VL127D User Manual

Mounting on a wall or LCD arm

The Monitor has Video Electronics Standards Association (VESA) standard mounting holes
tapped into the rear panel. The standard holes are M4 set 100 mm (for 17" and larger monitors) or
75 mm (12" and 15" monitors) apart.
If you intend to mount the monitor on the wall, we strongly recommend that you use wall mount
kits with attached M4*10mm screws and which can hold a load of more than the weight of the
monitor. Ensure it is securely and safely installed.
If you mount any device using these 4 holes on the back of the panel you must not
use use screws longer than 10 mm. Longer screws will cause damage which is not
covered by the product warranty.
Warning
The position of the connectors can vary between models and they may or may not be covered
with a flap.
16