HP ProLiant DL580 Generation 5 (G5) Quickspecs page 34

QuickSpecs
Additional Options
HP Rack Series HP Rack Series HP Rack Series HP Rack Series HP Rack 10000 G2 Series (Carbon/Graphite Metallic) HP Rack 10000 G2 Series HP Rack 10000 G2 Series HP Rack 10000 G2 Series
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
HP 10642G2 1200mm deep Rack cabinet Shock Rack
HP 10647G2 1200mm deep Rack cabinet Shock Rack
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment NOTE: NOTE: NOTE:
installed.
NOTE: NOTE: NOTE: Please see the QuickSpecs for Technical Specifications and additional NOTE:
information:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following NOTE: NOTE: NOTE:
URL: http://www.hp.com/go/rackandpower.
NOTE: NOTE: NOTE: NOTE: The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks
provide enhanced airflow for maximum cooling, allowing these racks to be fully
loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements CAUTION: CAUTION: CAUTION:
to ensure adequate airflow and to prevent damage to the equipment: Front and rear
doors: If your 42U server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open area for
ventilation). Side: The clearance between the installed rack component and the side
panels of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION: CAUTION: CAUTION: Always use blanking panels to fill all remaining empty front panel U- CAUTION:
spaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
NOTE: Quick deploy rail system provides tool-free support for racks with square or NOTE: NOTE: NOTE:
round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP
series), with an adjustment range of 24" - 36". The ambidextrous cable management
arm can be mounted on either the left or right side for improved cable management.
DA - 12770 Worldwide — Version 44 — November 23, 2010
HP ProLiant DL580 Generation 5 (G5) HP ProLiant DL580 Generation 5 (G5) HP ProLiant DL580 Generation 5 (G5) HP ProLiant DL580 Generation 5 (G5)
AF001A
AF002A
AF092A
AF094A
Page 34