Canon VIXIA HF R50 Instruction Manual page 152

Menu item
[Power On Using LCD
Panel]
B
[Initialize &/8]
@
[Initialize 8]
B
[Initialize ']*
[Firmware]
B
[Delete Memory Save
Folder]*
[Reset All]
* Option available only after connecting an external hard drive to the camcorder.
[Available Space in Memory]/[Used Space in Memory]:
[Available Space in Memory] displays an information screen where you
can check the available space on the memory, approximate remaining
recording times (AVCHD and MP4 movies) and number of photos that can
be recorded. In playback mode, [Used Space in Memory] displays an
information screen where you can check the used space on the memory,
the total recording time (AVCHD and MP4 movies) and the number of
photos recorded.
• Estimated figures about available movie recording time and available
number of photos are approximate and based on the currently selected
video quality and a photo size of 1920x1080.
• In the information screen of a memory card you can also check its
Speed Class.
• B The [Total space] shown for the built-in memory indicates
actually usable space. It may be slightly smaller than the nominal built-in
memory capacity listed in the specifications.
[External Hard Drive Info]:
connected to an external hard drive, this setting displays information
about the hard drive.
152
Additional Information
Setting options
[Enable], [Off]
B
[& Built-in Mem.], [8 Mem. Card]
[Complete Initialization]: Toggle on or off
–
–
–
[No], [Yes]
During playback mode, when the camcorder is
A
29
113
112
In recording mode,
–
–
–