Changing The Thumbnail Image Of A Scene - Canon VIXIA HF R50 Instruction Manual

Changing the Thumbnail Image of a Scene

For scenes recorded in
image that will appear in the baby album ([9] index screen).
Operating modes:
1 Open the [9] index screen (A 46).
2 Play back the desired scene.
3 When the image you want to use as the thumbnail image of the
scene appears, touch the screen and then touch [Ý] to pause the
playback.
4 Open the [Set Thumbnail] screen.
>
[Edit]
5 Bring the scene to a precise point if necessary.
Playback controls will appear on the screen (A 48). Use any special
playback modes (fast playback, frame reverse/advance) as necessary
to locate the desired point.
6 Set the displayed frame as the scene's thumbnail image.
>
[Set]
NOTES
• Only the thumbnail of the scene displayed in the baby album ([9] index
screen) will change.
• Dividing a scene whose thumbnail image was changed will reset the
scene's thumbnail image.
mode, you can change the thumbnail
SCN
[Set Thumbnail]
[Yes]
Advanced Playback and Editing
93