Honda 2011 Ridgeline Owner's Manual page 48

Installing a Child Seat
Make sure the head restraint is in
the lowest position. Lift the cover,
then route the tether strap around
the upper guide. Route the tether
strap downward properly, making
sure the strap is not twisted, then
attach the strap hook to the center
tether anchor.
44
Rigid type
4. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
2011 Ridgeline
Flexible type
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
5. Whatever type you have, follow
the child seat maker's instructions
for adjusting or tightening the fit.