Honda 2011 Ridgeline Owner's Manual page 351

LOCK TAB
3. Disconnect the blade assembly
from the wiper arm:
Press and hold the lock tab.
Slide the blade assembly toward
the lock tab until it releases
from the wiper arm.
BLADE
4. Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull up firmly until the tabs
come out of the holder.
2011 Ridgeline
Wiper Blades
BLADE
REINFORCEMENT
5. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
CONTINUED
347