Honda 2011 Ridgeline Owner's Manual page 219

Compass Zone Selection
In most areas, there is a variation
between magnetic north and true
north. Zone selection is required so
the compass can compensate for this
variation. To check and select the
zone, do this:
1. Find the zone for your area on the
zone map (see page 216
zone number (1 through 15)
corresponds to a compass zone on
the table (see page 216
2. Press and hold the compass
button for about 3 seconds. When
all of the direction icons begin to
blink, release the button.
3. The blue direction icon(s) blink
and show the current zone.
4. If the zone is incorrect, press and
). Each release the compass button
repeatedly to get to the correct
number.
).
2011 Ridgeline
Compass
5. The compass will return to the
normal display about 4 seconds
after you stop adjusting a zone
number.
CONTINUED
215