Honda 2011 Ridgeline Owner's Manual page 368

Changing a Flat Tire
CONNECTOR BUTTON
DIAL
11. Attach the stay to the extension,
then attach the wheel nut wrench
to the end of the extension.
Make sure the stay, the extension,
and the wheel nut wrench are
securely attached.
364
WHEEL NUT WRENCH
HOOK
EXTENSION
STAY CONNECTOR BUTTON
12. Insert the hook at the end of the
stay into the opening on the dial at
the bottom of the jack.
2011 Ridgeline
13. Turn the jack dial (wheel nut
wrench) clockwise as shown to
raise the vehicle until the flat tire
is off the ground.