Table of Contents
Advertisement
OPERATION
Backlight Settinq (continued)
Backlight will turn on, irselected, while the unit alarms
and remain on for 3 seconds after the unit stops
alarming. When any button is pressed, the backlight
will illuminate at the dim setting and remain on for 3
seconds afterwards. The backlight will also illuminate
while in option mode.
Dim/Dark Mode
(XTR-690SE only)
Dim/Dark Mode reduces the illumination of the display.
•
Press the Dark button to reduce illumination to a
Dim setting.
•
Pressthe Dark button a second time engages
Dark Mode. The display illumination is further
reduced.
Dim or Dark Mode can be engaged during an alert. In
Dark Mode, the display goes aark for as long as a
signal is being detected and for 20 seconds after, then
the display returns to the dimmer setting.
•
Press the Dark button a third time to restore full
illumination to the display.
7 Color Multi-band Display
(XTR-695SE only)
The display can be set so that each Band alert can be
a different color (i.e. K Band alerts in Blue, X Band
alerts in Green, Ka Band alerts in Purple, etc,) or Scroll
ALL colors while alarming. To make changes see
Option Select Mode steps 17 thru 20 on page 13.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts off
the detector after 3 hours. The timer is reset jf the
detector is turned off, unplugged or any button is pressed
before the timer has expired. The detector will alert you
with an audible and visual warning before it shuts off.
During this warning, you can momentarily reset the timer
by_ pressing any button. If the unit has automatically turned
off, press any button to turn the unit back on. Refer to
"Option Select Mode" for instructions for changing
the battery saver mode options.
11
Advertisement
Table of Contents
