Table of Contents
Advertisement
OPERATION
Engaging VG-2
To engage or disengage VG-2 Detection:
• Press and hold the VG-2 button. Display shows:
X
PWR
Alert
K
VG-2
City
Ka
In Highway Mode
• Pressing VG-2 a second time disengages VG2.
Important: Check to make sure that the VG-2 feature is
turned on every time the unit is used.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts off your
detector after 3 hours if you forget to turn it off. The timer is
reset if the detector is turned off, unplugged or any button is
pressed before this timer has expired. The detector will alert
you with an audible and visual warning before it shuts off.
Display shows:
X
K
PWR
Alert
Ka
During this warning you can momentarily reset the unit by
pressing any button. This will reset the timer.
If the unit has automatically turned itself off, press any button
to turn the unit back on. You can manually engage the
Vehicle Battery Saver Mode by pressing and holding the City
button until one beep is heard. The auto shutoff function will
initiate after several seconds.
12
In City Mode
City
VG-2
All Alert LED's Flash
RADAR/LASER ALERTS
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep the
closer or stronger the radar source. Example:
X
K
PWR
Alert
Ka
1 Alert LED = weak signal, 4 Alert LED's = strong signal
Pulse Protection
®
When a pulse type signal (instant on strong signal) is
detected an urgent 3 second audio warning is sounded
and the display shows:
After 3 seconds standard alert pattern continues.
13
City
VG-2
Advertisement
Table of Contents
