Pop™ Mode Alerts - Whistler Total Band Protection XTR-690SE Owner's Manual

POP™ MODE ALERTS
pop'"
Mode Alerts
Because POP"" Mode radar utilizes the same
K or Ka band frequencies,
POpl~'
Mode Alerts will be
displayed as regular radar alerts.
LASERIRADAR ALERTS
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected, the band 10 and
signal strength are displayed. The audio alert is
continuous and has a geiger counter-like
pattern. The faster the beep, the closer or
stronger the radar source.
Laser Audio/Visual Alerts
When a laser signal is detected, the audio alert is
continuous for a minimum of 3 seconds.
• The Displays Shows: [!::;.SEF~~ IIIIITllD
•
Pulse Protection®
Pulse (or instant-on) radar is more difficult to
detect than conventional radar because it
remains 'off' until activated to measure the speed
of a targeted vehicle.
When a pulse type transmission is detected, your
Whistler detector sounds an urgent 3-second
audio warning and the display shows:
I
I-II II
1- ,-
I
1-'_"- "
After the 3-second pulse alert, the standard alert
pattern continues for as long as the signal is
present.
It is important to respond promptly to a pulse
alert, since warning tirne may be minimal.
18