What To Do If; Oven Lamp - Electrolux EKG603202 User Manual

Removing the glass:
2
1
To replace the glass panels, do
the above steps in the opposite
sequence. Before you lower the
trim, attach the A trim part to the
door. Refer to the diagram.

11.4 Oven lamp

WARNING!
There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the
oven for protection of the oven
light and glass cover.

12. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The appliance does not
operate.
A
Problem
1.
Push the door trim at one side to re-
move it. Refer to the diagram.
2. Pull up the trim.
3.
Remove the glass panels.
Replacing the oven lamp
1.
2.
3.
4.
Possible cause
The fuse in the fuse box
is released.
You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
Clean the glass cover.
Replace the oven lamp with applica-
ble 300°C heat-resistant oven lamp.
Use the same oven lamp type.
Install the glass cover.
Remedy
Control the fuse. If the
fuse is released more
than one time, refer to a
qualified electrician.
ENGLISH 21