ALLEN & HEATH ZED 12 FX User Manual page 22

Dly+verb (level)
1 9
Dly+verb (size)
2 10
Dly+verb (regen)
3 11
PingPong(regen)
4 12
BeatDly (regen)
5 13
6 Ambient (echo) 14
7 SlapVerb (size) 15
DoubleZED(size)
8 16
Bank 9-16
SEL
PARAMETER (HOLD)
TAP
Effect Preset Name
1 Dly+verb(level)
2 Dly+verb(size)
3 Dly+verb(regen)
4 PingPong(regen)
5 BeatDly(regen)
6 Ambient(echo)
7 SlapVerb(size)
8 DoubleZED(size)
9 Plate(decay)
10 Plate(predly)
11 Plate(colour)
12 Hall1(size)
13 Hall2(size)
14 Arena(size)
15 Flanger(dpth)
16 Chorus(dpth)
Allen & Heath
EFFECTS PROCESSOR
Effects Type List & Description.
There are 16 different effects presets in the ZED Effects Processor. Each is fed with
Plate (decay)
a mono signal from the FX bus, and the output from the effects processor is in ste-
Plate (predly)
reo.
Plate (colour) Each preset has a parameter adjust control which is matched to the preset. This
control may morph several parameters all at once, for example the parameter con-
Hall1 (size)
trol for the Chorus effect will adjust not only the depth, but the response of the
Hall2 (size)
filters in software to create a more or less intense effect. In general, when adjusting
the effect parameter, the more LED's that are illuminated, the more intense the
Arena (size)
effect or higher the parameter value.
Flanger (dpth)
Chorus (dpth)
To restore the parameter settings to the factory defaults, hold down both SEL but-
tons whilst switching on the power to your ZED.
Delay with Reverb. Delay feeds reverb (Classic Plate). TAP for delay time
Delay with Reverb. Delay feeds reverb (Classic Plate). TAP for delay time
Min = 70mS Max = 1.35S, PARAMETER adjusts the regeneration of the delay.
Ping Pong delay (left then right) in parallel with Plate reverb. TAP for left delay time
As (4) but right delay is set for 1/4 beat of left. Good for off beat 4/4 delay sound. TAP
Classic plate reverb. PARAMETER adjusts tonal texture from dark to bright.
Effects Type Table with description
Effect Description & Parameter adjustment.
Delay with Reverb. Delay feeds reverb (Classic Plate).
TAP for delay time Min = 70mS Max = 1.35S, Adjust the level of reverb.
Min = Min = 70mS Max = 1.35S, PARAMETER Adjusts the size of reverb.
Min = 70mS Max = 1.35S, PARAMETER adjusts the delay regeneration.
for left delay time & PARAMETER adjusts the delay regeneration.
Echo Delay with Reverb. PARAMETER adjusts the echo time.
Reverb with echo reflections creating classic slapback reverb sound.
PARAMETER adjusts the slapback size (more slap echo).
Classic stereo doubler.
PARAMETER adjusts delay and size.
Classic plate reverb. PARAMETER adjusts decay time.
Plate reverb with pre-delay. Good for vocals/percussion.
PARAMETER adjusts pre-delay time (for increased intelligibility).
Smooth classic hall reverb. PARAMETER adjusts size of hall.
Brighter hall reverb. PARAMETER adjusts size of hall.
Arena reverb. PARAMETER adjusts size of arena.
Classic flanger effect. PARAMETER adjusts depth and tonality.
Chorus effect. PARAMETER adjusts depth and tonality.
22
.
ZED-12FX, 16FX & 22FX User Guide