REMOVE THE REFRIGERATOR DOOR
8
(cont.)
D
hinge.
If the refrigerator has a refreshment center,
one person should slowly lift the door up and
should carefully guide the electrical lines
(harnesses) through the bottom hinge.
90°
Refreshment Center Models Only
Set the door on a non-scratching surface with
E
the inside up.
Installation Instructions
28
REPLACING THE DOORS
9
To replace the doors, simply reverse steps
3 through 8.
However, please note the following:
• When lowering the doors onto the bottom
hinges, make sure the second person
carefully guides the tube and harnesses
through the holes in the hinges.
• When connecting the water line, make sure
you insert the tubing all the way to the mark.
• Do not pinch the tubing and harnesses when
placing the doors on the bottom hinges.
• When connecting the power line and the
electrical lines (refreshment center models
only), be sure that the connectors are seated
together fully.
Mark