Blackout Setup; Erase All Memory - Elation DMX Partner User Manual

Dmx recorder and playback device

Hide thumbs Also See for DMX Partner:

Table of Contents

Section 14: Blackout Setup

This feature allows you to set your DMX Partner to activate or deactivate black out on power up.

Deactivating allows you to automatically begin playback of shows on power up.

1. Flip the power switch to the "OFF" position.

2. Press and hold the "FADE" and "SHOW 10" buttons simultaneously and flip the power switch to the

"ON" position. As a result, the LED will display "Y-BO" or "N-BO" depending on the current active

setting.

3. If you wish to have blackout active on power up, press the "FADE" button so the LED display's "N-

BO". If you wish to deactivated black out on power up, press the "FADE" button so the LED display's

"Y-BO".

4. To confirm your blackout setting, press the "BLACK-OUT" button.

Section 15: Erase All Memory

Use this function only if you wish to completely erase

DMX Partner.

1. Flip the power switch to the "OFF" position.

2. Press and hold the "RECORD", "SPEED", "SHOW 5" and "BLACK-OUT" buttons and

simultaneously flip the power switch to the "ON" position. All memory will now be erased.

all show currently stored in your

DMX PARTNER

Table of Contents