Brookstone Wi-Fi Scanner Wand User Manual page 19

TRoUbleshooTIng
PrOBlem
Blurry images .
Error LED is on after
powering on Scanner .
Error LED is on when
scanning a document .
Black images/Black or
white vertical lines .
Wi-Fi abnormal
connection .
(CONTINUED)
POSSIBle cauSe
The lens of the Scanner
is dirty, or the Scanner
is not being held still
while scanning .
Scanner calibration is off .
Scanning speed is too fast .
1 . Scanner sensor protective
glass is dirty .
2 . Calibration data is off-set .
1 . Abnormal connection .
2 . The battery is low .
SOlutION
Clean the lens with a soft,
dry cloth and try scanning
again with a steadier motion .
Re-calibrate the Scanner .
See page 6 for details .
Press the Power/Scan
button to reset and scan
the document again .
1 . Clean the sensor' s
protective glass with
clean and soft dry cloth .
2 . Recalibrate Scanner .
1 . Reconnect Wi-Fi .
2 . Replace with new 2x AA
alkaline batteries .
18