Advertisement
Quick Links
RENAISSANCE™ ROUND FRONT TOILET
❑
2241.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 305mm (12") rough-in
• Round front bowl
• Close-coupled tank
• Color matched trip lever
• 2 bolt caps
• 100% factory fl ush tested
❑
3338.011 Bowl
❑
4037.017 Tank
Nominal Dimensions:
693 x 505 x 752mm
(27-5/16" x 19-7/8" x 29-5/8")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specifi ed:
❏ Color: ❏ White ❏ Bone
❏ Seat: American Standard #5322.011 "Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #5308.014 "Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2006 American Standard Inc.
ROUND FRONT TOILET
FINISHED WALL
693mm
(27-5/16)
17mm ± 6mm
(11/16 ±1/4)
232mm
(9-1/8)
425mm
(16-3/4)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
308mm
159mm
(11-1/4)
(6-1/4)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS
SUPPLIED.
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K75
RENAISSANCE™
VITREOUS CHINA
505mm
(19-7/8)
C/L
SUPPLY
AS
REQ'D
383mm
(15-1/16)
*
375mm
203mm
(14-3/4)
(8)
152mm
(6)
FINISHED
232mm
FLOOR
(9-1/8)
Revised 5/05
752mm
(29-5/8)
Advertisement
