Ignition Switch - Honda 2010 Accord Coupe Owner's Manual

The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), START (III)
You can insert or
LOCK (0) −
remove the key only in this position.
To turn the key, push it in slightly. If
your vehicle has an automatic
transmission, the shift lever must
also be in Park.
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
ACCESSORY (I) − You can
operate the audio system and the
accessory power sockets in this
position.
ON (II) − This is the normal key
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
Use this position
START (III) −
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
2010 Accord Coupe

Ignition Switch

You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or the
ACCESSORY (I) position and open
the driver's door. Remove the key to
turn off the beeper.
If your vehicle has an automatic
transmission, the shift lever must be
in Park before you can remove the
key from the ignition switch.
Removing the key from the
ignition switch while driving
locks the steering. This can
cause you to lose control of the
vehicle.
Remove the key from the
ignition switch only when
parked.
79