Honda 2010 Accord Coupe Owner's Manual page 324

6. Turn on the lights to make sure
the new bulb is working.
7. Push the trunk lid trim back into
position.
8. Put the fasteners into the holes on
the side of the trunk lining.
Reinstall the screws.
Replacing the High-mount Brake
Light Bulb
BULB
1. Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
2010 Accord Coupe
3. Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
SOCKET
Lights
321