Playing the XM Radio (EX-L and all V6 models without navigation system)
Preset
−
You can store up to 12
preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
1.
Press the
button. Either
XM1 or XM2 will show in the
display.
2.
Use the selector knob, or the
CATEGORY bar or SCAN button
to tune to a desired channel.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
3.
Pick the preset button you want
for that channel. Press and hold
the button until you hear a beep.
4.
Repeat steps 2 and 3 to store the
first six channels.
5.
Press the XM button again. The
other XM band will show. Store
the next six channels using steps 2
and 3.
Once a channel is stored, simply
press and release the proper preset
button to tune to it.
XM Radio Display Messages
''LOADING''
XM is loading the
−
audio or program information.
The channel
''OFF AIR''
−
currently selected is no longer
broadcasting.
''UPDATING''
The encryption
−
code is being updated. Wait until the
encryption code is fully updated.
Channels 0 and 1 should still work
normally.
2010 Accord Coupe
''NO SIGNAL''
−
The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.
'' - - - - ''
−
The selected channel
number does not exist, or is not part
of your subscription, or this channel
has no artist or title information at
this time.
''NO INFO''
The selected
−
channel has no artist or title
information at this time.
''ANTENNA''
There is a problem
−
with the XM antenna. Please consult
your dealer.
CONTINUED
147