GDC SX-2000A Series User Manual page 34

3. CONTROL PANEL
1 Automation labels and projector commands can now be executed from an interface on the
Control Panel. Press
as shown in Figure 16.
2 A new window opens as seen in Figure 17. Select an automation label to view the actions
associated with the label. Press
3
When a projector is configured for automation, projector primitives and macros can be triggered
from this interface as well. Select the projector primitive or macro to be executed, and click the
Send Projector Primitive
SX-2000A Series with Integrated Media Block/SX-2001A Series
User Manual
(Short Form Version)
Automation on the Control Panel
Execute to execute the automation label.
or Send Projector Macro
- 34 -
to start the manual automation interface
to send the command to the projector.
September 6, 2012