Advertisement

Air Cleaner

50-870
PART NO. 410-10-651-0001 - 03-31-02
Copyright © 2002 Delta Machinery
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
ESPAÑOL: PÁGINA 11
For Parts, Service, Warranty or other Assistance,
1-800-223-7278 (
1-800-463-3582).
please call
In Canada call

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 50-870 and is the answer not in the manual?

Questions and answers

Summary of Contents for Delta 50-870

  • Page 1: Air Cleaner

    Air Cleaner 50-870 PART NO. 410-10-651-0001 - 03-31-02 Copyright © 2002 Delta Machinery To learn more about DELTA MACHINERY visit our website at: www.deltamachinery.com. ESPAÑOL: PÁGINA 11 For Parts, Service, Warranty or other Assistance, 1-800-223-7278 ( 1-800-463-3582). please call In Canada call...
  • Page 2: General Safety Rules

    If you have any ques- tions relative to a particular application, DO NOT use the machine until you have first contacted Delta to deter- mine if it can or should be performed on the product.
  • Page 3: Safety Rules For Air Cleaners

    SAFETY RULES FOR AIR CLEANERS DANGER: DO NOT USE THIS UNIT TO FILTER METAL DUST. Combining wood and metal dust can create an explosion or fire hazard. This unit is intended to filter non-explosive atmospheres only. WARNING: DUST GENERATED BY CERTAIN WOODS AND WOOD PRODUCTS CAN BE HAZARDOUS TO YOUR HEALTH.
  • Page 4 INTRODUCTION Model 50-870 Delta Air Cleaner is specifically designed to quietly circulate and filter non-metallic dust which is generated throughout the work area. The Air Cleaner is furnished with two filters: a disposable outer filter which filters out larger particles five microns in size; and the secondary filter will capture 91% of dust particles of one micron in size (one micron = one millionth of a meter).
  • Page 5: Using The Air Cleaner On A Bench Or Floor Surface

    ASSEMBLY INSTRUCTIONS Determine whether the Air Cleaner will be used on the floor, on a bench, or hanging from overhead. If the Air Cleaner will be used as a mobile unit, proceed to “USING THE AIR CLEANER ON A BENCH OR FLOOR SURFACE”...
  • Page 6: Connecting Machine To Power Source

    MOUNTING THE AIR CLEANER TO THE CEILING OR OVERHEAD SUPPORT WARNING:This unit weighs 85 pounds. When mounting overhead, make certain that the unit is securely fastened and supported. 1. Locate the four 1” eye-bolts, and the four 1/4-20 flange nuts supplied with the unit. 2.
  • Page 7: Grounding Instructions

    GROUNDING INSTRUCTIONS WARNING: THIS TOOL MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK. 2. Grounded, cord-connected tools intended for use 1 . A l l g r o u n d e d , c o r d - c o n n e c t e d t o o l s : on a supply circuit having a nominal rating less than In the event of a malfunction or breakdown, grounding 150 volts:...
  • Page 8: Extension Cords

    Continue this process for up to 7 1/2 hours of run time. Fig. 10A. The 50-870 Dust Collector provides a timer that can be All of these actions can be manually controlled by using set by remote control. (A) Fig. 10A.
  • Page 9: Maintenance

    NOTE: The air cleaner may produce a slight odor for the first few hours of operation due to the protective coating that is applied to internal components. This odor will dissipate and should be disregarded. IMPORTANT: Never operate the air cleaner without air filters in place. The Delta 50-870 air cleaner can be used in • bench-top sanding applications.
  • Page 10: Parts, Service Or Warranty Assistance

    Two Year Limited Warranty Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product pre- paid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection.
  • Page 11 Delta Distributor, • Authorized Service Center, or Porter-Cable Delta Factory Service Center. If you do not have access to any of these, call 888-848- • 5175 and you will be directed to the nearest Porter-Cable Delta Factory Service Center. Las Estaciones de Servicio Autorizadas están ubicadas en muchas grandes ciudades.

Table of Contents