Specification - LG 26LG30D Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LB81A
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100-240V~, 50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. General specification
Item
Broadcasting system
Available Channel
Tuner IF
Input Voltage
Screen Size
Aspect Ratio
Module
Operating Environment
Storage Environment
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes

SPECIFICATION

3. Test method
Specification
PAL-BG, DTV : DVB-T
1) VHF : 00 ~ 12
2) UHF : 20 ~ 75
3) CATV : 02 ~ 44
4) DTV : 06 ~12, 27 ~ 69
1) PAL : 38.90MHz(Picture),
34.40MHz(Sound)
2) DVB-T : 36.125MHz
100 - 240V~, 50/60Hz
26 inch Wide (1366 x 768)
16:9
T260XW02-VM(AUO)
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
- 6 -
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC: CE, IEC
Model Market
26LG30D-AA Australia
Mark : 240V, 50Hz
LGE Spec
Appliance
Safety : IEC60065
EN60065
EMC : CISPR 13 Class B
Remark
LGE Internal Use Only