Hdmi Doesn't Display - LG 26LG30D Service Manual

6. HDMI doesn't display

Check input connect J900 , J901, J902
Can you see the normal waveform?
Check DDC communication lines(IC900, IC901,
IC903 Pin5,6)
Check HDCP communication lines(IC902)
Check the input of HDMI Seitch(IC902)
This signal is TMDS.
Can you see the normal waveform?
Check the output of HDMI Switch(IC902).
Can you see the normal waveform?
Check the output of Main IC(IC100).
Especially you should check
The H,V sync and clock.
Can you see the normal waveform?
This board has big problem because Main IC(IC100)
have some troubles.
After checking thoroughly all path once again, You
should decide to replace Main Board or not.
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
J900 , J901, J902
may have problem. Replace this Jack.
After checking the Power of this chip, you should
decide to replace this or not.
After checking the Power of this chip, you should
decide to replace this or not.
After checking the trace of TMDS lines and power of HDMI
Switch, you should decide to replace HDMI Switch or not.
After checking the Power of HDMI Switch you should
decide to replace MST3361 or not.
After checking the Power of Main IC(IC100) you
should decide to replace Main IC or not.
- 18 - LGE Internal Use Only